In this article
  1. Impact force calculator
  2. Why do seatbelts work? Inertia explained
  3. The numbers: a 50 km/h crash, calculated
  4. What the safety data shows
  5. Could you brace yourself with your arms?
  6. Why the belt goes across your hips and shoulder
  7. Frequently asked questions

Why do seatbelts work? Because of inertia: in a crash the car stops suddenly, but your body keeps moving at the speed the car was going. A seatbelt catches you early and lets you slow down over a longer distance, together with the car’s crumple zone, which cuts the force on your body many times over. It also spreads that force across your hips and chest, the strongest parts of your skeleton, and keeps you inside the car.

Key facts

  • 45%: how much a lap and shoulder belt cuts the risk of fatal injury for front-seat car occupants (IIHS).
  • 60%: the same figure for front-seat occupants of SUVs, vans and pickups.
  • About 33 g: average deceleration stopping from 50 km/h over 0.3 m, a belted occupant in our example.
  • About 197 g: stopping from the same speed over 5 cm, like hitting a hard surface unbelted.

Impact force calculator

See how stopping distance changes the force. The defaults are our worked example: a 70 kg person stopping from 50 km/h over 0.3 metres.

Work out the average force and g-force on a person or object that stops suddenly, such as in a car crash.

Assumes constant deceleration, so peak forces in a real crash are higher than these averages. Stopping distance is how far the body moves while slowing, including seat belt stretch and the car’s crumple zone.

Want to come back to it later? Bookmark our standalone impact force calculator, or browse all our free calculators.

Why do seatbelts work? Inertia explained

Newton’s first law says an object keeps moving at the same speed unless a force acts on it. In a crash, the car is stopped by whatever it hits, but you are not attached to the car. Unbelted, you keep going until something stops you: the steering wheel, dashboard or windscreen. Those stop you over a few centimetres, which means a huge force. The faster you stop, the bigger the force; this is the idea of impulse, explained in OpenStax College Physics: force × time = change in momentum.

The numbers: a 50 km/h crash, calculated

We used the constant-deceleration formula, a = v² ÷ (2 × distance), for a 70 kg person at 50 km/h (13.9 m/s). The stopping distances are illustrative assumptions, not measurements from a specific car.

Situation (assumed stopping distance)Stopping timeAverage decelerationAverage force on a 70 kg body
Belt plus crumple zone (0.6 m)86 ms16.4 g11.3 kN
Belt only (0.3 m)43 ms32.8 g22.5 kN
Unbelted, hitting a hard surface (0.05 m)7 ms196.7 g135.0 kN
World Elev calculations using g = 9.80665 m/s² (NIST). Real crashes have peaks above these averages.

Doubling the stopping distance halves the force. That is the whole job of crumple zones, airbags and the slight stretch built into seatbelt webbing: they buy distance and time. As our calculator shows, hitting something at 50 km/h is like falling from about 9.8 metres, roughly a three-storey building.

What the safety data shows

The Insurance Institute for Highway Safety (IIHS) says that for drivers and front-seat passengers, a lap and shoulder belt reduces the risk of fatal injury by 45% in a car and by 60% in an SUV, van or pickup. It also notes that an unbelted rear-seat passenger raises the risk of death for a belted driver in front of them by 137% in a frontal crash, because the passenger is thrown forward into the seat.

Could you brace yourself with your arms?

No. In our belted example, the average force is 22.5 kN, roughly the weight of 2.3 tonnes. Unbelted against a hard surface, it is about 135 kN, close to the weight of 14 tonnes. No one can hold that back with their arms, and the whole event is over in a few hundredths of a second, far faster than a person can react.

MythWhat the physics says
“I can brace myself in a low-speed crash.”At 50 km/h the average stopping force is tonnes, applied in tens of milliseconds.
“Back seats are safe without a belt.”Inertia applies in every seat; IIHS research links unbelted rear passengers to more deaths in the front.
World Elev summary based on the calculations above and IIHS research.

Why the belt goes across your hips and shoulder

  • Hips: the lap belt should sit low across the pelvis, a strong bone, not the soft stomach.
  • Chest and shoulder: the diagonal strap spreads force across the ribcage and collarbone.
  • Pretensioners: many modern belts tighten in the first instant of a crash to start slowing you sooner.
  • Load limiters: let the belt give a little at very high force, lowering peak chest loads.

The same physics explains conservation of momentum and why heavier objects do not fall faster. For more on forces in motion, read whether centrifugal force is real. The University Physics chapter on impulse and collisions covers the maths in more depth.

Safety note: This article explains physics for education. Always wear a seatbelt, and follow your car maker’s instructions for child seats and belt fit.

Frequently asked questions

Why do seatbelts work?

They stop you more gradually than the dashboard or windscreen would and spread the force across strong bones, cutting the risk of fatal injury by 45% in cars, according to IIHS.

What is the physics of a seatbelt?

Inertia keeps you moving when the car stops. The belt applies force over a longer time and distance, so by the impulse principle the force on your body is much smaller.

Why are seatbelts important in the back seat?

An unbelted rear passenger can be thrown forward, and IIHS cites research showing it raises the death risk for a belted driver in front by 137% in frontal crashes.

How many g’s is a car crash?

It depends on speed and stopping distance. At 50 km/h, stopping over 0.3 m averages about 33 g; over 5 cm, nearly 200 g.

Read more in our Physics section.

Sources

  1. IIHS: Seat belts
  2. OpenStax College Physics 2e: Impulse
  3. OpenStax University Physics: Impulse and collisions
  4. NIST: Standard acceleration of gravity